2026 Palomino Puma229RB

The Palomino Puma 229RB leaves Forest River's factory at 5,788 lbs dry, with a published GVWR of 7,288 lbs and 1,500 lbs of cargo capacity between the two. Cargo capacity is 21% of the loaded rating, and Forest River's own definition is worth reading before you plan against it: cargo capacity is what remains for fresh water, gear, food, batteries and every dealer-installed accessory. Fresh water alone is 8.3 lb per gallon, so filling this trailer's 43-gallon fresh tank spends 357 lbs of that 1,500 lbs before anything else is loaded.

Dry tongue weight is 730 lbs, or 13% of the dry weight. Ten to fifteen percent is the conventional band for a bumper-pull trailer, and this plan sits inside it as published. Tongue weight is not fixed: it moves with how the trailer is loaded, and weight added ahead of the axles raises it. A weight-distribution hitch is the normal fitment at this tongue load, and the tow vehicle's tongue-weight limit is a separate number from its trailer-weight limit.

Tank capacities are 43 gallons fresh, 70 grey and 35 black, 105 gallons of waste capacity against 43 gallons of supply. The ratio is what governs how long the trailer can sit off hookups: waste capacity exceeds fresh, so the fresh tank is the binding constraint and refilling extends the stay. Forest River publishes these three figures per floorplan, and they are the factory's numbers rather than a segment average.

Against the rest of the Palomino Puma roster this is the 2nd of 20 floorplans by dry weight, in a line that runs from 5,608 lbs to 9,753 lbs. It sits in the lighter third of the line. Comparing floorplans inside one line is more reliable than comparing across brands, because every figure here comes from the same factory channel on the same day.

A useful way to read the pair of weights is to stop planning against the dry figure. Nobody tows a trailer at 5,788 lbs: that is the weight before water, batteries, propane, bedding, food, tools and anything the dealer bolted on. Load half the published cargo capacity, which is modest for a family trip, and this plan is already near 6,538 lbs on the road. Compare that number against the tow vehicle, not the dry weight, and leave margin on top of it - the published GVWR of 7,288 lbs is a limit rather than a target.

Every number above was captured twice from Forest River and checked against itself before it was published. The line roster block and the individual floorplan page are two separate factory renderings of the same trailer, and this plan's 4 shared figures agree exactly on both. Dry weight plus cargo capacity also equals the published GVWR exactly, which is the arithmetic check this site runs on every profiled floorplan. Where a figure is missing from this page it is because Forest River does not publish it in this channel, not because it was hard to find - and the row says so rather than being quietly dropped.

Forest River publishes no floorplan description for this plan in the channel this page is built from - only the numeric specification block. Rather than describe a layout from the floorplan code, which would be a guess dressed as a fact, this page carries what the factory publishes and says where it stops. 229RB is a Palomino Puma designation and this site does not decode it into a layout claim.

Nine Puma travel-trailer floorplans from the 2026 factory roster that this catalogue did not carry. They run 5,608 to 9,753 lb dry on lengths of 25 feet 11 inches to 38 feet 7 inches, with dry tongue weights of 650 to 1,240 lb, so the range spans half-ton territory at the bottom and asks for a three-quarter-ton conversation at the top. Palomino publishes a GVWR for all nine and dry weight plus cargo capacity equals it exactly on all nine.

This floorplan carries its water comfortably. A full 43-gallon fresh tank is roughly 24% of the 1,500-pound cargo capacity, leaving the 229RB with a usable gear budget even when you tow full.

The published dry tongue weight of 730 pounds is 13% of the 5,788-pound dry weight, which sits inside the 10–15% band usually quoted for stable towing. It is still a dry figure: loading the front pass-through and the fresh tank both push it up.

Nothing above changes the ceiling. Loaded to its 7,288-pound GVWR the 229RB is towing 1,500 pounds more than its 5,788-pound dry figure, and that is the number your vehicle has to be rated for — not the brochure weight.

Tank balance is generous here: 43 gallons of fresh against 70 grey and 35 black, so waste capacity keeps pace with supply and the fresh tank is the constraint that ends a dry stay.

Ranked by GVWR, the 229RB sits 2 of 9 in the Palomino Puma line: 7,288 pounds against a line that runs from 7,108 to 11,253 pounds. That position is the useful thing to know, because the plans immediately either side of it are the real alternatives.

Either side of it in the same line: Palomino Puma 227RK is 180 pounds lighter at 7,108 lb GVWR; and Palomino Puma 25BHS is 240 pounds heavier at 7,528 lb GVWR.

Against the 229RB: the Flying Cloud 25FB is 12 lb heavier; the Globetrotter 25FB is 12 lb heavier; the International 25FB is 12 lb heavier. Those are differences in the published numbers only — what they cost, how they are built and how they live are separate questions each of those pages answers on its own terms.

Those are the nearest travel trailers from other lines by weight — one per line, picked by proximity on that figure and nothing else. They are listed so the same tow vehicle can be checked against real alternatives, not because they are equivalent inside; layout, build and price diverge sharply across that group.

For scale, the Palomino Puma floorplans profiled here run 5,608 to 9,753 pounds dry and 26 to 39 feet of exterior length across 9 plans. Where a floorplan falls in that spread usually says more about which vehicle can tow it, and which site it fits, than the layout name does.

Every profiled floorplan in this line, with the full weight table, is on the Palomino Puma line hub.

This catalog tracks 18 specification fields per floorplan. Named sources publish 11 of them for the 229RB. The rest are not shown, because the alternative is reading a figure across from a sibling floorplan or from what the segment usually does — and a number nobody published is worth less than an admitted gap.

Not published for this floorplan: interior height, sleeps, slide count, axle count, tire specification, refrigerator, air conditioning. If you find one of these in a manufacturer document for this plan, it belongs on this page.

The completeness figure at the foot of this page (85%) measures the same thing on the full field set: it is a measurement of how much this floorplan’s manufacturer publishes, not of how much research went into the page.

How every figure here was sourced and checked is set out on the methodology page.